AITeM

Aitem Academy Corso Formazione Di Base 2024

Aitem Academy Corso Formazione Di Base 2024

INNOVATIVE TOOLS AND TOPICS IN MANUFACTURING PROCESSES AND PRODUCTION SYSTEMS: CASE STUDY ANALYSIS

 

Università degli Studi di Perugia, Dipartimento di Ingegneria
Via Goffredo Duranti, 93, Perugia

10-11 Settembre 2024

PURPOSE

The course aims to provide an overview of the state of the art on the most innovative tools and topics in the area of manufacturing processes and production systems. The course will focus attention on the most current investigation methods and techniques, as well as on the methods of organizing the research itself, also providing the opportunity to learn the use of manufacturing processes simulation software. A significant part of the course will be dedicated to the discussion of case studies.

WHO IS IT FOR

The course is mainly intended for academic research personnel (mainly doctoral students, research fellows and young researchers in the scientific-disciplinary sector ING-IND/16 or related sectors) and industrial personnel actively engaged in R&D activities.

Plan

The course will present the main topics dealt with by the Sezioni of the Association which develop and disseminate the most advanced knowledge in sectors considered strategic in manufacturing research activities. They represent the bridge between the Association and the Italian industry. A part of the course is dedicated to manufacturing process simulation software tool provided by EcoTre Valente srl and for which a temporary use license will be issued to each participant.

The interventions will be made by professors and researchers engaged in research activities that the Sezioni are currently carrying out, as well as by the technical staff of EcoTre Valente srl. The course will be organized in parallel sessions, according to the program shown below. The participants will preliminary specify, during application, the sessions to be attended.

The course will take place during the AITEM WorkshopParticipants will therefore have the opportunity to attend the Workshop in the afternoon and the gala dinner.

Plan 

TUESDAY SEPTEMBER 10, 2024

Hours
Activity
08:30
Participant registration
09:00
Welcome address and Academy presentation
09:30

Section: Sustainable and Innovative Manufacturing Processes for Composites (SIMPCo)
Bio-Composites Manufacturing and FRP Composites Recycling: Current Trends and an LCA Case Study
Luca Boccarusso, Michela Simoncini, Iacopo Bianchi

Sezione: ADAptive manufacturing processes for elongated Profiles and seam welded Tubes (ADAPT)
Innovation, Challenges, and Solutions for Metal Tube and Profile Forming Process Control Systems
Enrico Simonetto, Antonio Fiorentino

12:30
Transfer by coach from Department to Rectorate
13:00
Lunch
17:00
Transfer by coach from Rectorate to Department
17:30

Sezione: Laser based manufacturing in the eV sector (LaserEMobility)
Laser technology selection for Li-ion battery production with Analytical Hierarchy Process
Ali Gökhan Demir

Sezione: Innovative joining technologies for naval applications (INJOIN)
Joining systems for composite structures
Guido Di Bella

19:00
Break
20:00-23:00
Gala Dinner

WEDNESDAY SEPTEMBER 11, 2024

Hours
Activity
09:00

Sezione: Machining for Aerospace (M4A)
Multi-Sensor Approaches and Machine Learning Techniques: Application for Chatter Detection in Milling
Niccolò Grossi, Giovanni Totis

Sezione: Surface treatment and functionalization (REALIZE)
Laser based techniques for surface functionalization
Leonardo Orazi

12:00
Light lunch at Department
13:00
Break
13:30

Intervento EcoTre Valente srl
Software Deform
Software enabling designers to analyze different aspect such as metal forming processes, heat treatment, machining and mechanical joining processes

Intervento EcoTre Valente srl
Software Quick Cast
Software dedicated to the complete casting process evaluation: filling, solidification and porosity prediction including core blowing and semi-solid modeling.

15:00
Break
15:30-17:00

Intervento EcoTre Valente srl
Software Deform

Intervento EcoTre Valente srl
Software Quick Cast

COURSE VENUE

Participants must be at 8.30 am on 10 September 2024 in “Room X” at the ground floor of the Dipartimento di Ingegneria, Via Goffredo Duranti, 93, Perugia.

To reach the department you can use: i) your own vehicle; ii) the train, the stop is “Perugia Università”, in front of the department car park; iii) the bus, using lines F and S (line F also stops at the Il Cigno hotel). 



EDUCATIONAL CREDITS – FINAL PROJECT

At the end of the course it is possible to request a certificate of participation.

The attendance of the entire course and the development of an individual final project, subject to evaluation, guarantee the assignment of 4 ECTS. The methods for preparing and sending the final project will be communicated by the Director of the Academy during the course.

 

ENROLMENT COSTS

€ 150 for PhD students and university researchers

€ 300 for industrial personnel (€ 200 if participation in one day only)

AITEM members: - 10% member discount

Not AITEM members: + 22% VAT

The enrolment fee includes participation to the course, lunches, coffee breaks, dinner scheduled on 10 september and the use of the teaching material, written in English. 

All members must independently pay for travel and accommodation.



WHERE TO STAY

The booking of accommodation is the responsibility of each individual participant.

Recommended hotels:

  1. Hotel Giò, Jazz, Wine, Via Ruggero D’Andreotto, 19 – 06124 Perugia

Bed and breakfast buffet single room €82.00 double room €108.00

Reservations must be sent to the email address: reception@hotelgio.it specifying the agreement for the AITEM 2024 Workshop conference

  1. Hotel Il Cigno, Via Firenze, 84, 06127 Perugia

Overnight stay in single room €65.00, double room €100.00, breakfast €5.00

Reservations must be sent to the email address: hotelilcigno@hotmail.com specifying the agreement for the AITEM 2024 Workshop conference

 

It is recommended to make your reservation as soon as possible, as September is a high season month for the entire city of Perugia.

HOW TO SIGN UP

The payment of the participation fee must be made, for organizational reasons, by 30 June 2023. 10 Luglio 2024.

To register, you need to fill in the online form, according to the following procedure:

  1. Enter the requested data.
  2. You will receive a confirmation email of your registration request containing the instructions for the payment by bank transfer. It is not necessary to send the copy of transfer to the secretariat.
  3. The secretariat will then send you the payment receipt (for members) or the invoice (for non-members).

 

The teaching material will be made available to regularly registered participants by 31 July 2024.

 

CONTACTS

Course secretariat:

Associazione Italiana Tecnologie Manifatturiere

E-mail: segreteria@aitem.org

Tel. +39 3441203243 (Mon-Fri 8:30-12:30)

    SCELTA:





    PER I NON SOCI: DATI PER LA FATTURAZIONE




    SESSIONI PARALLELE DI INTERESSE (indicare le sessioni del programma che si intende seguire):



    CENA SOCIALE:

    ALLERGIE/INTOLLERANZE

    del corso AITEM Academy formazione di base 2024.

    en_GBEnglish